Active with remarks
This application needs additional settings. Please follow the documentation below to create your own connectionUnique, active service acces point to a network. There are different types of connections (API key, Oauth…). More.

Twilio

The Twilio modulesThe module is an application or tool within the Boost.space system. The entire system is built on this concept of modularity. (module - Contacts) More allow you to watch, create, update, list, and/or delete messages, recordings, notifications, and phone numbers in your Twilio account.

Prerequisites

Account SID and Auth TokenThe API token is a multi-digit code that allows a user to authenticate with cloud applications. More
Upgraded Twilio account
Twilio phone number

In order to use Twilio with Boost.spaceCentralization and synchronization platform, where you can organize and manage your data. More IntegratorPart of the Boost.space system, where you can create your connections and automate your processes. More, it is necessary to have a Twilio account. If you do not have one, you can create a Twilio account at https://www.twilio.com/try-twilio.

Note

The moduleThe module is an application or tool within the Boost.space system. The entire system is built on this concept of modularity. (module - Contacts) More dialog fields that are displayed in bold (in the Boost.space Integrator scenarioA specific connection between applications in which data can be transferred. Two types of scenarios: active/inactive. More, not in this documentation article) are mandatory!

Connecting Twilio to Boost.space Integrator

To connect your Twilio account to Boost.space Integrator, you need to obtain your SID and Auth Token.

Log into your Twilio Account.
On the Dashboard page, you can find ACCOUNT SID and AUTH TOKEN.
Go to Boost.space Integrator and open the Twilio module’s Create a connection dialog.
Enter the SID and Auth Token provided in step 2 to respective fields.
Click the Continue button.

The connection has been established.

Messages

Watch Messages

Retrieves message details when a new message is created.

Connection	Establish a connection to your Twilio account.
To phone number	Enter the phone number to Filter messages sent to the specified number.
From phone number	Enter the phone number or sender ID to filter messages received from the specified number.
Limit	Set the maximum number of messages Boost.space Integrator will return during one execution cycleA cycle is the operation and commit/rollback phases of scenario execution. A scenario may have one or more cycles (one is the default)..

Create a Message

Sends a new outgoing message.

Connection	Establish a connection to your Twilio account.
Send a Message From	Enter a Twilio phone number in E.164 format, an alphanumeric sender ID, messaging service or a Channel Endpoint address that is enabled for the type of message you want to send. Phone numbers or short codes purchased from Twilio also work here. You cannot, for example, spoof messages from a private cell phone number. If you are using `messaging_service_sid`, this parameter must be empty.
Phone Number/Message service/Channel	Enter or select phone number, message service, or channel you want to associate the sent message to.
To	Enter the destination phone number in E.164 format for SMS/MMS or Channel user address for other 3rd-party channels.
Body	Enter the text of the message you want to send. Max. 1,600 characters.
Media URL	The URL of the media to send with the message. The media can be of type `gif`, `png`, and `jpeg` and will be formatted correctly on the recipient’s device. The media size limit is 5MB for supported file types (JPEG, PNG, GIF) and 500KB for other types of accepted media. You can include up to 10 media URLs. You can send images in an SMS message only in the US and Canada.
Smart Encoded	Select the Yes option to detect and replace Unicode characters that have a similar GSM-7 character.
Validity Period	Set how long in seconds the message can remain in our outgoing message queue. After this period elapses, the message fails and we call your statusCreate statuses for each module separately to create an ideal environment for efficient and consistent work. More callback. Can be between 1 and the default value of 14,400 seconds. After a message has been accepted by a carrier, however, we cannot guarantee that the message will not be queued after this period. We recommend that this value be at least 5 seconds.
Status Callback	Insert the URL from the New Message Status Eventinstant triggerEvery scenario has a trigger, an event that starts your scenario. A scenario must have a trigger. There can only be one trigger for each scenario. When you create a new scenario, the first module you choose is your trigger for that scenario. Create a trigger by clicking on the empty module of a newly created scenario or moving the... module to send status information to the module. If specified, we POST these message status changes to the URL: `queued`, `failed`, `sent`, `delivered`, or `undelivered`. Twilio will POST its standard request parameters as well as some additional parameters including `MessageSid`, `MessageStatus`, and `ErrorCode`.
Application	Select the application that should receive message status. We POST a `message_sid` parameter and a `message_status` parameter with a value of `sent` or `failed` to the application‘s `message_status_callback`.
Max Price	The maximum total price in US dollars that you will pay for the message to be delivered. Can be a decimal value that has up to 4 decimal places. All messages are queued for delivery and the message cost is checked before the message is sent. If the cost exceeds `Max Price`, the message will fail and a status of `Failed` is sent to the status callback. If `Max Price` is not set, the message cost is not checked.
Provide Feedback	Whether to confirm delivery of the message. Select `Yes` if you are sending messages that have a trackable userCan use the system on a limited basis based on the rights assigned by the admin. More action and you intend to confirm delivery of the message using the Message Feedback API. This option is set to `No` by default.

List Messages

Retrieves a list of messages associated with your account.

Connection	Establish a connection to your Twilio account.
To phone number	Enter the phone number to Filter messages sent to the specified number.
From phone number	Enter the phone number or sender ID to filter messages received from the specified number.
Limit	Set the maximum number of messages Boost.space Integrator will return during one execution cycle.

Get a Message

Retrieves message details.

Connection	Establish a connection to your Twilio account.
Message ID	Enter (map) the ID of the message you want to retrieve details about.

Delete a Message

Deletes a message.

Connection	Establish a connection to your Twilio account.
Message ID	Enter (map) the ID of the message you want to delete.

List Message Media

If media exists on a specified message, you can retrieve information about images and other media.

Connection	Establish a connection to your Twilio account.
Message ID	Enter (map) the ID of the message you want to retrieve media from.

Calls

Watch Calls

Retrieves call details when a new call is created.

Connection	Establish a connection to your Twilio account.
To phone number	Enter the phone number to filter calls made to this phone number, SIP address, Client identifier or SIM SID.
From phone number	Enter the phone number, SIP address, Client identifier or SIM SID to filter calls by.
Parent Call SID	Enter the SID to filter calls by.
Status	Select the status to filter calls by.
Limit	Set the maximum number of calls Boost.space Integrator will return during one execution cycle.

Create a Call

Makes a new call to a phone number, SIP address, or client identifier.

Connection	Establish a connection to your Twilio account.
Make a Call From	The phone number or client identifier to use as the caller id. If using a phone number, it must be a Twilio number or a Verified outgoing caller id for your account. If the `To` parameter is a phone number, `From` must also be a phone number.
Phone Number/Outgoing Caller	Enter or select the phone number, or outgoing caller you want to associate the call to.
To	Enter the phone number, SIP address, or client identifier to call.
Set Instructions From	Select the source of instructions for the call.
URL	URL Enter the absolute URL that returns the TwiML instructions for the call. Please find more details in the Twilio documentation. Method The HTTP method we should use when calling the `url` parameter’s value. Can be: `GET` or `POST` and the default is `POST`. Fallback URL Enter the URL that we call using the `fallback_method` if an errorService is unavailable due to a failure, a service responds with unexpected data or the validation of input data fails. More occurs when requesting or executing the TwiML at `url`. Fallback Method The HTTP method that we should use to request the `Fallback URL`. Can be: `GET` or `POST` and the default is `POST`. Status Callback URL Enter the URL we should call using the `Status Callback Method` to send status information to your application. If no `Status Callback Event` is specified, we will send the `completed` status. Status Callback Method Select the HTTP method we should use when calling the `Status Callback` URL. Can be: `GET` or `POST`. Default is `POST`. Status Callback Event Select one or more call progress events that we will send to the `Status Callback` URL. It can be: `initiated`, `ringing`, `answered`, and `completed`. If no event is specified, we send the `completed` status.
Twiml	Enter TwiML (Twilio Markup Language) instructions for the call Twilio will use without fetching Twiml from url parameter. For more information about TwiML please refer to the Twilio documentation.
Application	The SID of the Application resource that will handle the call.
BYOC	Enter the SID of a BYOC (Bring Your Own Carrier) trunk to route this call with. Note that `BYOC` is only meaningful when `To` is a phone number; it will otherwise be ignored.
Send Digits	A string of keys to dial after connecting to the number, maximum of 32 digits. Valid digits in the string include: any digit (`0`–`9`), ‘`#`‘, ‘`*`‘ and ‘`w`‘, to insert a half second pause. For example, if you connected to a company phone number and wanted to pause for one second, and then dial extension 1234 followed by the pound key, the value of this parameter would be `ww1234#`. Remember to URL-encode this string, since the ‘`#`‘ character has special meaning in a URL. If both `Send Digits` and `Machine Detection` parameters are provided, then `Machine Detection` will be ignored.
Timeout	The integer number of seconds that we should allow the phone to ring before assuming there is no answer. The default is `60` seconds and the maximum is `600` seconds. For some call flows, we will add a 5-second buffer to the timeout value you provide. For this reason, a timeout value of 10 seconds could result in an actual timeout closer to 15 seconds. You can set this to a short time, such as `15` seconds, to hang up before reaching an answering machine or voicemail.
Trim	Select whether to trim any leading and trailing silence from the recording.
Caller ID	Enter the phone number, SIP address, or Client identifier that made this call. Phone numbers are in E.164 format (e.g., +16175551212). SIP addresses are formatted as `[email protected]`.
SIP Call Authentication	Username Enter the username used to authenticate the caller making a SIP call. Password The password required to authenticate the user account specified above.
Recording	Select whether to recordOne row in the Boost.space database. These are individual rows under spaces in each module. For example single products, but not their variants. More the call. Can be `Yes` to record the phone call, or `Not` to not record. The default is No. Channels Set the number of channels in the final recording. The default is `mono`. `mono` recordsOne row in the Boost.space database. These are individual rows under spaces in each module. For example single products, but not their variants. More both legs of the call in a single channel of the recording file. `dual` records each leg to a separate channel of the recording file. The first channel of a dual-channel recording contains the parent call and the second channel contains the child call. Status Callback URL Enter the URL that we call when the recording is available to be accessed. Status Callback Method Select the HTTP method we should use when calling the `Status Callback` URL. Status Callback Events Select the recording status events that will trigger calls to the URL specified in `Status Callback`.
Enable Machine Detection	Select whether to detect if a human, answering machine, or fax has picked up the call. Timeout Enter the number of seconds that we should attempt to detect an answering machine before timing out and sending a voice request with `AnsweredBy` of `unknown`. The default timeout is 30 seconds. Speech Threshold Enter the number of milliseconds that is used as the measuring stick for the length of the speech activity, where durations lower than this value will be interpreted as a human and longer than this value as a machine. Possible Values: 1000-6000. Default: 2400. Speech End Threshold Enter the number of milliseconds of silence after speech activity at which point the speech activity is considered complete. Possible Values: 500-5000. Default: 1200. Speech Silence Timeout The number of milliseconds of initial silence after which an `unknown` AnsweredBy result will be returned. Possible Values: 2000-10000. Default: 5000.
Answering Machine Detection	Select whether to perform answering machine detection in the background. Default, blocks the execution of the call until Answering Machine Detection is completed. Status Callback URL Enter the URL that we should call using the `Status Callback Method` to notify customer application whether the call was answered by human, machine or fax. Status Callback Method Select the HTTP method we should use when calling the `Status Callback` URL. Can be: `GET or POST` and the default is `POST.`

List Calls

Retrieves a list of calls associated with your account.

Connection	Establish a connection to your Twilio account.
To phone number	Enter the phone number, SIP address, Client identifier or SIM SID to filter results by.
From phone number	Enter the phone number or Sender ID to filter calls from the specified number.
Parent Call SID	Filter calls spawned by calls with this SID.
Status	Select the status of the call to filter results by.
Limit	Set the maximum number of calls Boost.space Integrator will return during one execution cycle.

Get a Call

Retrieves call details.

Connection	Establish a connection to your Twilio account.
Call ID (SID)	Enter (map) the ID of the call you want to retrieve details about.

Delete a Call

Deletes a call.

Connection	Establish a connection to your Twilio account.
Call ID (SID)	Enter (map) the ID of the call you want to delete.

Recordings

Watch Recordings

Returns recording details when a new recording is created.

Connection	Establish a connection to your Twilio account.
Call ID (SID)	Enter (map) the ID of the call you want to filter retrieved recordings from.
Conference ID	Enter (map) the ID of the conference you want to filter retrieved recordings from.
Limit	Set the maximum number of recordings Boost.space Integrator will return during one execution cycle.

Download a Recording Media

Downloads a recording media file in wav or mp3 format.

Connection	Establish a connection to your Twilio account.
Recording ID	Enter (map) the ID of the recording you want to download.
Format	Select the format of the media file you want to download. WAV A binary WAV audio file with mime-type “audio/x-wav” is returned. WAV files have a bitrate of 128kbps. MP3 A binary MP3 audio file with mime-type type “audio/mpeg” is returned. MP3 files have a bitrate of 32kbps.

List Recording Transcriptions

Retrieves transcriptions generated from the recording (if any). The transcription text itself is the result of converting an audio recording to readable text.

Connection	Establish a connection to your Twilio account.
Recording ID	Enter (map) the ID of the recording you want to retrieve the transcription for.
Limit	Set the maximum number of transcriptions Boost.space Integrator will return during one execution cycle.

Transcriptions

Watch Transcriptions

Retrieves a transcription when a new transcription is created in your account.

Connection	Establish a connection to your Twilio account.
Limit	Set the maximum number of transcriptions Boost.space Integrator will return during one execution cycle.

Notifications

Watch Alerts

Returns an alert when a new alert is generated for an account.

Connection

Establish a connection to your Twilio account.

Log Level

Filter the monitored alerts by the log level.

Start Date

Filter alerts that occurred on or after this date and time. Specify the date and time in GMT and format as YYYY-MM-DD or YYYY-MM-DDThh:mm:ssZ.

	Note
	Queries for alerts older than 30 days are not supported.

End Date

Filter alerts that occurred on or before this date and time. Specify the date and time in GMT and format as YYYY-MM-DD or YYYY-MM-DDThh:mm:ssZ.

	Note
	Queries for alerts older than 30 days are not supported.

Limit

Set the maximum number of alerts Boost.space Integrator will return during one execution cycle.

Callback Webhooks

New Message Status Event

TriggersEvery scenario has a trigger, an event that starts your scenario. A scenario must have a trigger. There can only be one trigger for each scenario. When you create a new scenario, the first module you choose is your trigger for that scenario. Create a trigger by clicking on the empty module of a newly created scenario or moving the... when a message status is changed to: queued, failed, sent, delivered, or undelivered.

Add the module to the scenario.
Copy the provided webhookA webhook is a way for an app to send real-time information to a specific URL in response to certain events or triggers. URL.
Insert the copied URL to the Status Callback field in the Create a Message module.

Make an API Call

Allows you to perform a custom API call.

Connection	Connecting Twilio to Boost.space Integrator
URL	Enter a path relative to `https://api.twilio.com`. E.g. `/2010-04-01/Accounts.json` For the list of available endpoints, refer to the Twilio API Documentation.
Method	Select the HTTP method you want to use: GET to retrieve information for an entry. POST to create a new entry. PUT to update/replace an existing entry. PATCH to make a partial entry update. DELETE to delete an entry.
Headers	Enter the desired request headers. You don’t have to add authorization headers; we already did that for you.
Query String	Enter the request query string.
Body	Enter the body content for your API call.

Example of Use – List Messages

The following API call returns the SMS messages from your Twilio account:

URL:

2010-04-01/Accounts/{{accountSid}}/Messages.json

accountSid

The SID of the account that created the Message resources to read.

Method:

GET

Matches of the search can be found in the module’s Output under BundleA bundle is a chunk of data and the basic unit for use with modules. A bundle consists of items, similar to how a bag may contain separate, individual items. More > Body > messages.

In our example, 2 messages were returned: