Active
This application does not need additional settings. So you can make connectionUnique, active service acces point to a network. There are different types of connections (API key, Oauth…). More only by using your login credentials or by following the instructions below .

SMSC

The SMSC modulesThe module is an application or tool within the Boost.space system. The entire system is built on this concept of modularity. (module - Contacts) More allow you to create, update, list, search, and delete the contacts, senders, SMSes, statistics, and account balance from your SMSC account.

Getting Started with SMSC

Prerequisites

An SMSC account – create an account at smsc.ru/.

The moduleThe module is an application or tool within the Boost.space system. The entire system is built on this concept of modularity. (module - Contacts) More dialog fields that are displayed in bold (in the Boost.spaceCentralization and synchronization platform, where you can organize and manage your data. More IntegratorPart of the Boost.space system, where you can create your connections and automate your processes. More scenarioA specific connection between applications in which data can be transferred. Two types of scenarios: active/inactive. More, not in this documentation article) are mandatory!

Connecting SMSC to Boost.space Integrator

Log in to your Boost.space Integrator account, add a module from the SMSC app into an Boost.space Integrator scenario.
Click Add next to the Connection field.
In the Connection name field, enter a name for the connection.
In the Login and Password fields enter your SMSC account credentials and click Continue.

The connection has been established.

Contacts

Search Contacts

Searches for contacts or lists them all.

Connection	Establish a connection to your SMSC account.
FIO	Enter (map) full name to search the contacts to list the contacts that match the specified name. You can enter any of the initials like last name, first name, and/or patronymic.
Search	Enter (map) the contact name or phone number to search the contacts.
After ID	Select or map the contact identifier from which the list of contacts should be returned.
Limit	Set the maximum number of contacts Boost.space Integrator should return during one execution cycleA cycle is the operation and commit/rollback phases of scenario execution. A scenario may have one or more cycles (one is the default).. The default value is 10.

Create a Contact

Creates a new contact.

Connection	Establish a connection to your SMSC account.
Phones	Enter (map) the list of phone numbers separated by any separator or a phone number. Must be at least 8 characters long.
Name	Enter (map) the contact’s name.
Group IDs	Select or map the Group IDs to which the contact belongs.
Last Name	Enter (map) the contact’s last name.
First Name	Enter (map) the contact’s first name.
Middle Name	Enter (map) the contact’s middle name.
Contact ID	Enter (map) the Contact ID assigned by the client.
Birthday	Enter (map) the contact’s date of birth. See the list of supported date and time formats.
Comments	Enter (map) the comments for the contact.
Tags	Enter (map) the tags for the contact.
Other Phone Numbers	Enter (map) the additional phone numbers of the contact. The SMS will not be sent to these additional phone numbers.

Update a Contact

Updates an existing contact.

Connection	Establish a connection to your SMSC account.
Contact Phone	Select or map the contact’s phone number whose details you want to update.
New Phone	Enter (map) a new phone number. Must be at least 8 characters long.
Name	Enter (map) the contact’s name.
Group IDs	Select or map the Group IDs to which the contact belongs.
Last Name	Enter (map) the contact’s last name.
First Name	Enter (map) the contact’s first name.
Middle Name	Enter (map) the contact’s middle name.
Contact ID	Enter (map) the Contact ID assigned by the client.
Birthday	Enter (map) the contact’s date of birth. See the list of supported date and time formats.
Comments	Enter (map) the comments for the contact.
Tags	Enter (map) the tags for the contact.
Other Phone Numbers	Enter (map) the additional phone numbers of the contact. The SMS will not be sent to these additional phone numbers.

Delete a Contact

Deletes an existing contact.

Connection	Establish a connection to your SMSC account.
Contact Phone	Select or map the contact you want to delete.

Senders

List Senders

Retrieves all senders.

Connection	Establish a connection to your SMSC account.
All	Select or map the option to list the senders.
Operators	Select or map the operators to list the senders.
From Date	Enter (map) the date to list the senders whose statusCreate statuses for each module separately to create an ideal environment for efficient and consistent work. More has been changed for any of the operators on or after the specified date. When this parameter is specified, the names are sorted in descending order of the date of the name status change.
Limit	Set the maximum number of senders Boost.space Integrator should return during one execution cycle. The default value is 10.

Create a Sender

Creates a new sender.

Connection	Establish a connection to your SMSC account.
Sender	Enter (map) the sender’s name.
Comment	Enter (map) the message used to create the sender’s name.
Region	Select or map the region of the sender. For example, `Name settings for Ukraine`. When you select the region, additional fields related to the region auto-populates which are required to be filled. For more information, see the SMSC Developer documentation.
Mail	Select whether you want to add the sender’s email address.
Name	Enter (map) the email address owner’s name.
Site	Enter (map) the address of the site from which the codes will come to confirm the digital names of the senders. This parameter must have been previously added and activated as Sender ID. If not specified, messages will be sent on behalf of the sender by default.
Site Name	Enter (map) the site address specified in the text of the message with the confirmation code.
UserCan use the system on a limited basis based on the rights assigned by the admin. More	Enter (map) the login of the subclient to which the specified command applies.
Operators	Select whether you want to add the status code of the sender’s name from the operator.
Doc Info	Enter (map) the document file details which are transferred in the request body when creating or changing the sender’s name. Specify a description for the transferred file in this field.
Charset	Select or map the charset of the sender. For example, `Windows-1251`, `UTF-8`, `KOl8-R`.

Update a Sender

Updates an existing sender.

Connection	Establish a connection to your SMSC account.
Sender	Select or map the sender whose details you want to update.
Comment	Enter (map) the message used to create the sender’s name.
Region	Select or map the region of the sender. For example, `Name settings for Ukraine`. When you select the region, additional fields related to the region auto-populates which are required to be filled. For more information, see the SMSC Developer documentation.
Mail	Select whether to add the sender’s email address.
Name	Enter (map) the email address owner’s name.
Site	Enter (map) the address of the site from which the codes will come to confirm the digital names of the senders. This parameter must have been previously added and activated as Sender ID. If not specified, messages will be sent on behalf of the sender by default.
Site Name	Enter (map) the site address specified in the text of the message with the confirmation code.
User	Enter (map) the login of the subclient to which the specified command applies.
Operators	Select whether you want to add the status code of the sender’s name from the operator.
Doc Info	Enter (map) the document file details which is transferred in the request body when creating or changing the sender’s name. Specify a description for the transferred file in this field.
Charset	Select or map the charset of the sender. For example, `Windows-1251`, `UTF-8`, `KOl8-R`.

Delete a Sender

Deletes an existing sender.

Connection	Establish a connection to your SMSC account.
Type	Select or map the option to delete the sender: Sender ID Sender Name
Sender ID	Select or map the Sender ID you want to delete.
Sender Name	Select or map the sender’s name you want to delete.

Generate a Sender Verification Code

Generates a sender verification code.

Connection	Establish a connection to your SMSC account.
Sender	Select or map the sender for whom you want to generate the verification code.

Check a Sender Verification Code

Checks a sender verification code.

Connection	Establish a connection to your SMSC account.
Sender	Select or map the sender for whom you want to check the verification code.
Code	Enter (map) the verification code to check.

SMSES

Search Outgoing Messages

Searches for outgoing messages or lists them all.

Connection	Establish a connection to your SMSC account.
Start	Enter (map) the date to search the outgoing messages on or after the specified date.
End	Enter (map) the date to search the outgoing messages on or before the specified date.
Format	Select the format to search the outgoing messages: SMS Request Email Message Request
Phone	Enter (map) the number or a comma-separated list of phone numbers for which you want to get the historyBoost.space Integrator maintains a history of your scenario and records: The date that scenario execution started Status (success, warning, or error) Execution duration Number of operations spent during the scenario run Size of transferred data Link to detailed information, where you can inspect all data in that particular execution received and how the data was processed You can view this... of sent SMS messages.
Email	Enter (map) the email address or a comma-separated list of email addresses for which you want to get the history of sent SMS messages.
Limit	Set the maximum number of outgoing messages Boost.space Integrator should return during one execution cycle. The default value is 10.

Search Incoming Messages

Searches for incoming messages or lists them all.

Connection	Establish a connection to your SMSC account.
Hour	Enter (map) the hours for which you want to request incoming messages. The maximum number of hours is 168 or 7 days.
After ID	Enter (map) the ID of the message from which to return incoming messages, excluding the After ID itself.
To Phone	Enter (map) the client’s phone number to which incoming messages were received.
Limit	Set the maximum number of incoming messages Boost.space Integrator should return during one execution cycle. The default value is 10.

Check an SMS Status

Checks an SMS status.

Connection	Establish a connection to your SMSC account.
Phone	Enter (map) the phone number or a list of numbers separated by a comma for requesting the statusesCreate statuses for each module separately to create an ideal environment for efficient and consistent work. More of several SMS. For multiple requests, the numbers in the list must be listed in the order corresponding to the message IDs. To preserve the multi-request format, when requesting the status of a single message, include a comma after the phone number. This description is also valid for e-mail messages.
SMS ID	Enter (map) the Message ID or a comma-separated list of IDs when requesting the statuses of multiple messages. To preserve the multi-query format, when querying the status of a single message, include a comma after the message ID.
All	Select or map the option to check the messages: Get message status in the regular format Get full information about the sent message Add information about the country, operator, region of the subscriber to the message information
Charset	Select or map the encoding of the transmitted message: Windows – 1251 UTF – 8 KOI8-R

Send an SMS

Sends a new SMS.

Connection	Establish a connection to your SMSC account.
SMS Body Type	Select the SMS body type: Text List
List	Enter (map) a list of phone numbers and their corresponding messages, separated by a colon or semicolon, and presented as:`phone:message`
Phones	Enter (map) a phone number or phone number separated by a comma in the international format to which you want to send the message.
Message	Enter (map) the message text. The maximum allowed number of characters is 1000.
SMS ID	Enter (map) the identification number of the message. If not specified, it will be assigned automatically. Not necessarily unique.
Sender	Enter (map) the sender’s name that displays on the recipient’s phone.
Translit	Select or map the transliteration option for the message: Do not transliterate Translate in the form of ‘translit’ Translate in the form of ‘mpaHc/lum’
Tiny URL	Select whether to shorten the URL address in the message.
Time Format	Select or map the time format of sending the message to the subscriber: Date Time range Timestamp Time Shift
Date	Enter (map) the date on which you want to send the message.
Time Range	Enter (map) the time range between which you want to send the message in the h1-h2 format.
Timestamp	Enter (map) the time when the SMS is sent to the subscriber in the following formats: DDMMYYhhmm or DD.MM.YY hh: mm. h1-h2. Specifies the time range in hours. If the current time is less than h1, then the SMS message will be sent to the subscriber when h1 time comes, if the current time falls in the range from h1 to h2, the message will be sent immediately, in other cases the sending will be performed the next day when the h1 time is reached. This feature, for example, is useful in order to prevent subscribers from receiving SMS messages at night. 0ts, where ts is a timestamp, the time in seconds elapsed since 1 January 1970. +m. Specifies the relative offset of the time from the current time in minutes. The + character must be encoded as %2B in the HTTP request. If time = 0 or a time has already passed, the message will be sent immediately.
Time Shift	Enter (map) the timeshift in +m format that sets the relative offset from the current time in minutes.
Timezone	Enter (map) the time zone in which the time parameter is specified.
Period	Enter (map) the period during which the newsletter should be sent. Enter a value between 0.1 and 720 hours.
Freq	Enter (map) the interval or frequency with which you want to send SMS-mailing to the next group of numbers. Enter a value between 1 and 1440.
Flash	Select the type of message: Regular Message Flash Message
Bin	Select the binary message flag: Regular Message Binary Message Binary Message represented as Hexdecicmal string
Push	Select whether to send an internet link in your SMS message.
HLR	Select whether your SMS message contains information about a number from the operator’s base without sending a real SMS.
Ping	Select whether your SMS message contains ping information.
MMS	Select whether you want to send a regular SMS or a message with an MMS message attribute.
Mail	Select whether you want to send a regular SMS or an email message.
SOC	Select whether you want to send a regular SMS or a SOC message to the usersCan use the system on a limited basis based on the rights assigned by the admin. More of the social networks. For example, `Odnoklassniki`, `VKontakte` or users of `Mail.Ru Agent` .
Viber	Select whether you want to send a regular message or a Viber message.
File URL	Enter (map) the file URL address in the message.
Call	Select whether you want to send a regular SMS or a voice message.
Voice	Select or map the option if you are sending a voice message: Male voice Male alternative voice Female voice Female alternative voice
Parameters	Enter (map) the comma-separated list of parameters for a voice message in the following format: w – waiting time for the subscriber to pick up the handset after the start of the call in seconds i – repeat interval n – total number of dialing attempts
Subject	Enter (map) the subject of the MMS or e-mail message.
Charset	Select or map the encoding of the transmitted message: Windows – 1251 UTF – 8 KOI8-R
Cost	Select or map the cost option applicable to the message.
Valid	Enter (map) the lifetime validity of the SMS message. It is the time during which the operator will try to deliver the message to the subscriber. Ranges from 1 to 24 hours. It is also possible to transmit time in the`hh:mm`format in the range from `00:01` to `24:00`.
Max SMS	Enter (map) the maximum number of SMSes that a long message can be split into.
Img Code	Enter (map) the value of the alphanumeric code entered with the captcha when using the anti-spam checker. This field must be used in conjunction with the `userip` parameter.
User IP	Enter (map) the user’s IP address for which the limit is on the maximum number of messages per day will apply. This is set in your account settings in the Limit and Restrictions section.
Err	Select whether to add a list of erroneous numbers to the server response.
OP	Select whether to add information on each number to the server response.
Referral to Partner	Enter (map) the client as a referral to a specific partner ID for the current request.

Delete an SMS

Deletes an existing SMS.

Connection	Establish a connection to your SMSC account.
Phone	Enter (map) the phone number or a list of numbers separated by a comma whose messages you want to delete.
SMS ID	Enter (map) the Message ID or a comma-separated list of IDs you want to delete.

Statistics

List Statistics

Retrieves statistics of sent messages.

Connection	Establish a connection to your SMSC account.
Start	Enter (map) the date to list the statistics on or after the specified date. See the list of supported date and time formats.
End	Enter (map) the date to list the statistics on or before the specified date. If not specified, data from the start date is returned. See the list of supported date and time formats.
Limit	Set the maximum number of statistic itemsItems are rows in records (order/request/invoice/purchase...) Boost.space Integrator should return during one execution cycle. The default value is 10.

Accounts

Get an Account Balance

Retrieves an account balance.

Connection	Establish a connection to your SMSC account.
Add Currency	Select whether you want to include the currency details in the result.

Other

Make an API Call

Performs an arbitrary authorized API Call.

Connection	Establish a connection to your SMSC account.
URL	Enter a path relative to `https://smrc.ru/sys/`For example, `phones.php`. For the list of available endpoints, refer to the SMSC API Documentation.
Method	Select the HTTP method you want to use: GET to retrieve information for an entry. POST to create a new entry. PUT to update/replace an existing entry. PATCH to make a partial entry update. DELETE to delete an entry.
Headers	Enter the desired request headers. You don’t have to add authorization headers; we already did that for you.
Query String	Enter the request query string.
Body	Enter the body content for your API call.

Example of Use – List Contacts

The following API call returns all the contacts from your SMSC account:

URL:

phones.php

Method:

GET

Matches of the search can be found in the module’s Output under Bundle > Body.

In our example, 6 contacts were returned: